教师内容页
 |
孙琨 |
研究领域（方向）
1.摩擦磨损理论：材料二体及三体磨料磨损过程计算机模拟；纳米尺度磨料磨损过程分子动力学模拟；超高速干滑动摩擦磨损理论
2.快速成形技术：快速成形设备及加工方法研发；快速成形加工路径策略研究；快速成形运动控制系统研发
个人及工作简历
2003.12-至今，太阳成集团tyc234cc材料科学与工程学院铸造及耐磨材料研究所，教师
2001.12-2003.12，太阳成集团tyc234cc材料科学与工程学院，博士后
科研项目
1.国家自然科学基金面上项目,超高速下干滑动摩擦磨损特性，2015.1-2018.12，主持；
2.陕西省自然科学基金面上项目，残余应力对纳米摩擦磨损行为的影响机理研究，2014.8-2016.8, 主持；
3.军工项目,“XXX摩擦、热烧蚀研究及结构优化设计”，2014.1-2016.12，主持；
4.校综合交叉学科项目, 基于特征应变法的经典残余应力问题分析,2013.12-2015.12, 主持;
5.校自由探索项目,激光原位制备FeAl涂层工艺调控及性能表征, 2013.12-2015.12, 主持;
6.陕西省自然科学基金面上项目，磨粒磨损接触微观分子动力学研究, 2010.1-2012.12, 主持;
7.校自由探索项目, 磨损过程中微观接触破坏机理，2010.12-2012.12, 主持;
8.西安市科技计划项目，基于DSP的聚苯乙烯快速成形机专用集成运动系统研究，2007.1-2008.12, 主持;
9.企业项目，封严涂层冲蚀性能结构优化设计，2013.1-2013.12, 主持;
10.企业项目，发电机组振幅监测系统研发，2012.1-2012.12, 主持;
11.企业项目，大型聚苯乙烯快速成形机研发，2008.6-2009.12, 主持
学术及科研成果、专利、论文
在国内外学术期刊发表论文37篇，其中SCI检索19篇，EI检索27篇。获得国家发明专利4项。
论文情况：
1.Sun Kun, Shen, Weitao, Ma, Lifeng.The influence of residual stress on incipient plasticity in single crystal copper thin film under nanoindentation, Computional Materials Science, 2014(81), 226-232
2.Sun Kun, Fang Liang, Yan Zhiyang, Sun Jiapeng. Atomistic scale tribological behaveiors in nano grained and single crystal copper systems, Wear, 2013(303),191-201
3.Sun Kun, Fang Liang, Yan Weilin, Li Bo, Wang Yiqing. Kinetics of Surface Nanocrystallization for Hadfield Steel in Shot Peening, Advanced Science Letters，2011(4)1862–1866
4.Sun Kun, Li Bo, Fang Liang, Ye Qingguang. A Novel Rapid Prototyping System for Expandable Polystyrene, Rapid Prototyping Journal，2011(17)17-27
5.Sun Kun, Cheng Jian, Liu Xudong, Fang Liang, Ma Lifeng. In-Situ Fabrication of Fe–Al Intermetallic Coating by Laser Remelting, Journal of Mechatronics, 2014(2)1-5
6.Sun Kun, Lu Bingheng. Study on 3-D Solidification Simulation of Casting，2001 International Conference on eCommerce Engineering（ICeCE 2001）, Xi’an China
7.Ma Lifeng, Sun Kun. A direct approach for modeling ion exchange residual stress distribution in glass, The Journal of Strain Analysis for Engineering Design, 2014(45)445-451
8.Sun Jiapeng, Fang Liang, Han Jing, Han Ying, Chen Huwei, Sun Kun. Phase transformations of mono-crystal silicon induced by two-body and three-body abrasion in nanoscale, COMPUTIONAL MATERIALS SCIENCE，2014(82)140-150
9.Sun Jiapeng, Fang Liang,Sun Kun, Han Jing. Direct observation of dislocations originating from perfect twin boundaries，SCRIPTA MATERIALIA，2011( 65)501-504
10.Li Bo, Fang Liang, Sun Kun. Variance of Particle Size: Another Monitor to Evaluate Abrasive Wear, TRIBOLOGY LETTERS，2014(55)465-472
11.Yan Weilin, Fang Liang, Sun Kun. Thermodynamics of nanocrystilline formation in surface layer of Hadfield steel by shot peening, Materials Science & Engineering A 445(2007) 392-397
12.Yan Weilin, Fang Liang, Sun Kun. Effect of surface work hardening on wear behavior of Hadfield steel, Materials Science & Engineering A 460(2007) 542-549
13.Fang Liang, Zhao Jia, Sun Kun, Zheng Degang, Ma Dexin. Temperature as sensitive monitor for efficiency of work in abrasive flow machining，Wear, 2009(266)678-687）
14.Fang Liang, Cen Qihong, Sun Kun. FEM computation of groove ridge and Monte Carlo simulation in two-body abrasive wear，Wear 2005 (258) 265–274
15.Ma Lifeng, Korsunsky A.M., Sun Kun. Contact of coated systems under sliding conditions, Journal of Tribology 128(2006) 886-890
16.Fang Liang, Zhao Jia, Li Bo, Sun Kun. Movement patterns of ellipsoidal particle in abrasive flow machining，JOURNAL OF MATERIALS PROCESSING TECHNOLOGY，2009（209）6048-6056
17.Fang Liang, Li Bo, Zhao Jia, Sun Kun. Computer simulation of the two-body abrasion process modeling the particle as a paraboloid of revolution，JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009(209)6124-6133
18.Yan Weilin, Fang Liang, Zheng Zhanguang, Sun Kun, Xu Yunhua. Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel，TRIBOLOGY INTERNATIONAL，2009(42)634-641
19.Sun Jiapeng, Fang Liang, Han Jing, Han Ying, Chen Huwei, Sun Kun. Abrasive wear of nanoscale single crystal silicon, Wear, 2013(307)119-126
20.Zhao Jia, Xiong Shaomin, Bogy David B., Sun Kun; Fang Liang. Hard-particle-induced physical damage and demagnetization in the head-disk interface，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2013(19)1313-1317
21.Han Jing, Fang Liang, Sun Jiapeng, Han Ying, Sun Kun. Length-dependent mechanical properties of gold nanowires, JOURNAL OF APPLIED PHYSICS, 2012 (112)114314
22.Wang Yiqing, Wu Huaying, Jia Zhiyang, Huang Wei, Sun Kun, Lu Bingheng. Research on the Accuracy of Mask Projection Stereo-lithography，Advanced Materials Research，2012（66）542-547
23.Fang Liang, Sun Kun, Cen Qihong. Particle movement patterns and their prediction in abrasive flow machining，Tribotest 2007 (13), 195–206
24.Zhao Yucheng, Sun Kun, Zhang Yahong, Xu Qingyu. Fractal dimension of time series applied to identification of critical speed of jeffcott rotor system, Chinese Journal of Mechanical Engineering (English Edition), 2005(18)446-448
25.孙琨, 方亮, 叶庆光, 黄晓慧, 严伟林. 聚苯乙烯快速成形加工参数对表面粗糙度的影响, 太阳成集团tyc234cc学报, 2007(41)344-348
26.孙琨, 方亮, 岑启宏, 叶庆光, 龚道明. 新型聚苯乙烯泡沫塑料模三维快速制造技术, 特种铸造及有色合金, 2006(26)725-728
27.孙琨，岑启宏，方亮，带有装配定位系统的STL模型直接生成算法研究，机械制造.2004 (42)24-26
28.孙琨,马雷,方亮,卢秉恒.基于STL数据的快速原型分割制作算法研究，机械制造2003 ( 41) 11-14
29.孙琨，岑启宏，许云华，方亮，数值模拟技术在双金属复合弯管研制中的应用，铸造技术， 2003 (24)272-274
30.孙琨, 王伊卿, 卢秉恒. 基于RP的快速金属模具制造精度控制研究，中国机械工程，2002 (13)60-63
31.孙琨，翟建民，卢秉恒，复杂铸件凝固的三维有限元数值模拟，铸造技术，2001 (No.2)12-15
32.岑启宏, 孙琨，方亮．二体磨料磨损犁沟脊的三维有限元动态模拟．摩擦学学报. 2004 (24)249-253
33.王伊卿，孙琨，周宏志，朱东波，赵文珍，卢秉恒，电弧喷涂锌合金过程数值模拟，中国有色金属学报，2001(11)1083-1088
34.王伊卿, 孙琨, 刘艳玲, 赵万华. 异质金属夹层板的动态抗撞性能研究, 机械制造2012(50)45-48
35.陈旭,王伊卿, 孙琨，冯正义，赵万华，卢秉恒. 高速列车车厢夹层板断面结构的多目标优化, 太阳成集团tyc234cc学报, 2013(47)62-67
36.赵嘉,方亮, 孙琨, 马德新. 磨料流加工过程中介质黏温特性对金属磨损性能的影响, 摩擦学学报. 2008 (28)173-177
37.严伟林,方亮,孙琨,许云华.表面纳米化对高锰钢磨料磨损性能的影响, 太阳成集团tyc234cc学报, 2007(41)611-615
专利情况：
1.方亮. 基于柱坐标的泡沫塑料三维快速成形方法及装置, ZL200810231896.9, 2010 蔡洪能, 赵嘉, 孙琨, 叶庆光,
2.徐学武. 聚苯乙烯泡沫塑料模型的快速成型方法及其数控加工设备, ZL03134410.0, 2006 黄新华, 岑启宏, 黄晓慧, 方亮, 孙琨, 余豪,
3.方亮. 一种改性酚醛树脂及其制备方法, ZL03134408.9, 2005 孙琨, 林荣会,岑启宏,
4.方亮, 岑启宏, 许云华, 孙琨. 镁合金表面热压敷膜防腐处理的方法, ZL 03134409.7, 2005
论文情况：
1.Sun Kun, Shen, Weitao, Ma, Lifeng.The influence of residual stress on incipient plasticity in single crystal copper thin film under nanoindentation, Computional Materials Science, 2014(81), 226-232
2.Sun Kun, Fang Liang, Yan Zhiyang, Sun Jiapeng. Atomistic scale tribological behaveiors in nano grained and single crystal copper systems, Wear, 2013(303),191-201
3.Sun Kun, Fang Liang, Yan Weilin, Li Bo, Wang Yiqing. Kinetics of Surface Nanocrystallization for Hadfield Steel in Shot Peening, Advanced Science Letters，2011(4)1862–1866
4.Sun Kun, Li Bo, Fang Liang, Ye Qingguang. A Novel Rapid Prototyping System for Expandable Polystyrene, Rapid Prototyping Journal，2011(17)17-27
5.Sun Kun, Cheng Jian, Liu Xudong, Fang Liang, Ma Lifeng. In-Situ Fabrication of Fe–Al Intermetallic Coating by Laser Remelting, Journal of Mechatronics, 2014(2)1-5
6.Sun Kun, Lu Bingheng. Study on 3-D Solidification Simulation of Casting，2001 International Conference on eCommerce Engineering（ICeCE 2001）, Xi’an China
7.Ma Lifeng, Sun Kun. A direct approach for modeling ion exchange residual stress distribution in glass, The Journal of Strain Analysis for Engineering Design, 2014(45)445-451
8.Sun Jiapeng, Fang Liang, Han Jing, Han Ying, Chen Huwei, Sun Kun. Phase transformations of mono-crystal silicon induced by two-body and three-body abrasion in nanoscale, COMPUTIONAL MATERIALS SCIENCE，2014(82)140-150
9.Sun Jiapeng, Fang Liang,Sun Kun, Han Jing. Direct observation of dislocations originating from perfect twin boundaries，SCRIPTA MATERIALIA，2011( 65)501-504
10.Li Bo, Fang Liang, Sun Kun. Variance of Particle Size: Another Monitor to Evaluate Abrasive Wear, TRIBOLOGY LETTERS，2014(55)465-472
11.Yan Weilin, Fang Liang, Sun Kun. Thermodynamics of nanocrystilline formation in surface layer of Hadfield steel by shot peening, Materials Science & Engineering A 445(2007) 392-397
12.Yan Weilin, Fang Liang, Sun Kun. Effect of surface work hardening on wear behavior of Hadfield steel, Materials Science & Engineering A 460(2007) 542-549
13.Fang Liang, Zhao Jia, Sun Kun, Zheng Degang, Ma Dexin. Temperature as sensitive monitor for efficiency of work in abrasive flow machining，Wear, 2009(266)678-687）
14.Fang Liang, Cen Qihong, Sun Kun. FEM computation of groove ridge and Monte Carlo simulation in two-body abrasive wear，Wear 2005 (258) 265–274
15.Ma Lifeng, Korsunsky A.M., Sun Kun. Contact of coated systems under sliding conditions, Journal of Tribology 128(2006) 886-890
16.Fang Liang, Zhao Jia, Li Bo, Sun Kun. Movement patterns of ellipsoidal particle in abrasive flow machining，JOURNAL OF MATERIALS PROCESSING TECHNOLOGY，2009（209）6048-6056
17.Fang Liang, Li Bo, Zhao Jia, Sun Kun. Computer simulation of the two-body abrasion process modeling the particle as a paraboloid of revolution，JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009(209)6124-6133
18.Yan Weilin, Fang Liang, Zheng Zhanguang, Sun Kun, Xu Yunhua. Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel，TRIBOLOGY INTERNATIONAL，2009(42)634-641
19.Sun Jiapeng, Fang Liang, Han Jing, Han Ying, Chen Huwei, Sun Kun. Abrasive wear of nanoscale single crystal silicon, Wear, 2013(307)119-126
20.Zhao Jia, Xiong Shaomin, Bogy David B., Sun Kun; Fang Liang. Hard-particle-induced physical damage and demagnetization in the head-disk interface，MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS，2013(19)1313-1317
21.Han Jing, Fang Liang, Sun Jiapeng, Han Ying, Sun Kun. Length-dependent mechanical properties of gold nanowires, JOURNAL OF APPLIED PHYSICS, 2012 (112)114314
22.Wang Yiqing, Wu Huaying, Jia Zhiyang, Huang Wei, Sun Kun, Lu Bingheng. Research on the Accuracy of Mask Projection Stereo-lithography，Advanced Materials Research，2012（66）542-547
23.Fang Liang, Sun Kun, Cen Qihong. Particle movement patterns and their prediction in abrasive flow machining，Tribotest 2007 (13), 195–206
24.Zhao Yucheng, Sun Kun, Zhang Yahong, Xu Qingyu. Fractal dimension of time series applied to identification of critical speed of jeffcott rotor system, Chinese Journal of Mechanical Engineering (English Edition), 2005(18)446-448
25.孙琨, 方亮, 叶庆光, 黄晓慧, 严伟林. 聚苯乙烯快速成形加工参数对表面粗糙度的影响, 太阳成集团tyc234cc学报, 2007(41)344-348
26.孙琨, 方亮, 岑启宏, 叶庆光, 龚道明. 新型聚苯乙烯泡沫塑料模三维快速制造技术, 特种铸造及有色合金, 2006(26)725-728
27.孙琨，岑启宏，方亮，带有装配定位系统的STL模型直接生成算法研究，机械制造.2004 (42)24-26
28.孙琨,马雷,方亮,卢秉恒.基于STL数据的快速原型分割制作算法研究，机械制造2003 ( 41) 11-14
29.孙琨，岑启宏，许云华，方亮，数值模拟技术在双金属复合弯管研制中的应用，铸造技术， 2003 (24)272-274
30.孙琨, 王伊卿, 卢秉恒. 基于RP的快速金属模具制造精度控制研究，中国机械工程，2002 (13)60-63
31.孙琨，翟建民，卢秉恒，复杂铸件凝固的三维有限元数值模拟，铸造技术，2001 (No.2)12-15
32.岑启宏, 孙琨，方亮．二体磨料磨损犁沟脊的三维有限元动态模拟．摩擦学学报. 2004 (24)249-253
33.王伊卿，孙琨，周宏志，朱东波，赵文珍，卢秉恒，电弧喷涂锌合金过程数值模拟，中国有色金属学报，2001(11)1083-1088
34.王伊卿, 孙琨, 刘艳玲, 赵万华. 异质金属夹层板的动态抗撞性能研究, 机械制造2012(50)45-48
35.陈旭,王伊卿, 孙琨，冯正义，赵万华，卢秉恒. 高速列车车厢夹层板断面结构的多目标优化, 太阳成集团tyc234cc学报, 2013(47)62-67
36.赵嘉,方亮, 孙琨, 马德新. 磨料流加工过程中介质黏温特性对金属磨损性能的影响, 摩擦学学报. 2008 (28)173-177
37.严伟林,方亮,孙琨,许云华.表面纳米化对高锰钢磨料磨损性能的影响, 太阳成集团tyc234cc学报, 2007(41)611-615
专利情况：
1.方亮. 基于柱坐标的泡沫塑料三维快速成形方法及装置, ZL200810231896.9, 2010 蔡洪能, 赵嘉, 孙琨, 叶庆光,
2.徐学武. 聚苯乙烯泡沫塑料模型的快速成型方法及其数控加工设备, ZL03134410.0, 2006 黄新华, 岑启宏, 黄晓慧, 方亮, 孙琨, 余豪,
3.方亮. 一种改性酚醛树脂及其制备方法, ZL03134408.9, 2005 孙琨, 林荣会,岑启宏,
4.方亮, 岑启宏, 许云华, 孙琨. 镁合金表面热压敷膜防腐处理的方法, ZL 03134409.7, 2005
联系方式
电子邮箱：sunkun@mail.xjtu.edu.cn
